Archive for March 6, 2013

Turbidity Curtain Barrier

Written by Charlie. Posted in Oil spill products, Silt barrier

Oil absorbents

It’s not uncommon for it to be difficult to install turbidity curtains because the best point to install them must first be identified. These barrier curtains are primarily used to contain silt and sediment in specific areas. Turbidity curtain barriers follow certain rules that are dictated by several conditions. For instance, a silt barrier must be able to service as a containment solution of an extended period of time. Time durations are figured out by review the amount of time it takes for silt to settle at the bed. A turbidity curtain barrier must be wide enough to cover the area evenly as well.

Another major rule that a turbidity barrier curtain must follow depends on the size of the silt particles. In fact, an evaluation is performed on the size of silt particles in order to determine the settling time of silt. Turbidity curtain barriers are actually not all created equal because they must meet a diverse set of demands that are unique for each location. Up to six samples are collected in around the body of water in order to analyze the particles. After analyzing the particles, a specific perforation ratio must be created in the fabric of the barrier to match settling time.

In addition to a silt barrier or a turbidity curtain, there is oil spill response equipment that is found online as well. An oil skimmer is also an important tool for the environment as well. Another major element that must be analyzed before using a turbidity curtain is the current of the containment area. In fact, the height of a turbidity curtain depends on the current of the body of water. Today’s sophisticated solutions for silt and sediment containment options are found in PDFs, and reference guides by the U.S. Army Corp of Engineers.